
Wisk-it Kiosk for Mews
Software compatible
- Materialmetal
- Finishblack powder coat
- Top plate477 x 354 mm
- Under-desk body437 mm wide / 54 mm deep
- Total height297 mm with tablet mount
Compare 2 versions from €500.00 en €860.00 sin IVA
Diseñado por Wisk-it y fabricado bajo pedido. Confirmamos la configuración, el plazo y el envío antes del pago.
Versiones
Precios por quiosco, sin IVA ni envío. Confirmamos la configuración exacta, el plazo y el envío en tu presupuesto antes del pago. Precios por volumen para despliegues en varios establecimientos.
Cómo se configura el quiosco
Incluido
- Base de quiosco metálica a medida, pintura en polvo negra
- Placa elevada para el terminal de pago (Mews A1 / Verifone P630)
- Soporte y placa embellecedora para el codificador de llaves
- Soporte para una tarjeta llave
- With the iPad version: iPad Pro 13" (M4/M5) enclosure and fixed desk mount, rear camera exposed
Pedir por separado
- Codificador de llaves (confirmamos el modelo contigo)
- Terminal de pago: se recomienda Mews A1 (Verifone P630)
- Tablet: iPad Pro 13" M4/M5 recommended, available on request
- Soporte opcional para documentos de identidad, para una foto estable en el check-in
Instalación
- La base se encastra en el mostrador y requiere un hueco precortado
- Top plate 477 × 354 mm, 54 mm below the desk, 297 mm total height
- Enviamos el plano completo con medidas junto con tu presupuesto
- El terminal queda ligeramente elevado: totalmente visible para cumplir PCI y fácil para insertar una tarjeta
Especificaciones
- Material
- metal
- Finish
- black powder coat
- Top plate
- 477 x 354 mm
- Under-desk body
- 437 mm wide / 54 mm deep
- Total height
- 297 mm with tablet mount
- Installation
- recessed into the desk (pre-cut opening required)
- Tablet enclosure
- iPad Pro 13" (M4/M5) / rear camera exposed / black
- Tablet protection
- full cover / no buttons exposed / hidden wiring
- Payment terminal plate
- Mews A1 (Verifone P630) / raised for PCI visibility
- Key encoder
- mounted under the surface (Salto reader shown) / changeable bracket
- Key card holder
- single
- Lead time
- made to order / 3–4 weeks
- Incl.
- metal kiosk base, iPad Pro 13" enclosure and fixed desk mount, payment terminal plate, key encoder bracket and cover plate
- Order separately
- tablet
Preguntas sobre este producto
Does the Wisk-it Kiosk for Mews work with Mews?
Yes. The Wisk-it Kiosk for Mews is compatible with Mews (Built for Mews Kiosk self check-in (iPad, key encoder and Mews A1 terminal)). Wisk-it checks every model against the hardware Mews publishes as supported, and our team can confirm your exact setup before you order. Más información ›
Which Wisk-it Kiosk for Mews version should I choose?
There are 2 versions. Not sure? Send us your setup and we'll pick the exact part number.
How much does the Wisk-it Kiosk for Mews cost?
Prices start at €500.00 per kiosk, excluding VAT and shipping. Request a quote and we'll confirm the exact configuration, shipping and volume pricing before you pay. Más información ›
How long does delivery take?
Each kiosk is made to order and ships in 3–4 weeks. The lead time is confirmed in your quote.
What do I need to install it?
The base is recessed into the desk or counter, so it needs a pre-cut opening. The top plate is 477 × 354 mm and the base sits 54 mm below the desk. We send the full dimension drawing with your quote.
Are the payment terminal and key encoder included?
No. The kiosk has a plate for the payment terminal (Mews A1 / Verifone P630 recommended) and a bracket for the key encoder, but both devices are ordered separately. We can help you source and coordinate them, and an iPad Pro 13" is available on request.







